Centrifugal Air Mover Pro
Low amp draw (UNDER 3 AMPS!), balanced airflow characteristics and maximum velocities of 975 CFM, over 2,700 FPM are the foundation on which the Phoenix Centrifugal Air Mover is built.
- 2.8 Amps on High Speed
- 2.4 Amps on Low Speed
- Maximum Velocity – 2700 FPM
- Balanced Exhaust Airflow
- Directional Airflow Horizontal, 45° Angle, 90° Angle
Description
The most airflow for the fewest amps of any centrifugal
Low amp draw (UNDER 3 AMPS!), balanced airflow characteristics and maximum velocities of 975 CFM, over 2,700 FPM are the foundation on which the Phoenix Centrifugal Air Mover is built. Phoenix made sure the body was the most rugged and durable it could be, to stand up to the rigors of the restoration industry.
Getting more equipment into the drying chamber is always a challenge. The typical household electrical system cannot support the amount of equipment needed to dry the structure quickly and efficiently ensuring a nonstop search for equipment that provides both performance and low amp draw.
The unique 1/3 horsepower design of the Phoenix Centrifugal Air Mover coupled with a two-speed switch allows the restoration technician to deliver the most airflow using the fewest amps. Maximum amp draw on high speed is 2.8 amps. Minimum amp draw on low speed is a mere 2.4 amps. This means that it is now possible to fit as many as four centrifugal air movers onto a typical 15 amp household circuit. If you attempt four centrifugals from our competition, we recommend you locate the breaker box first.
Features
- 2-Speed, 1/3 Horsepower Motor with automatic-reset thermal protection.
- 2.8 Amps on High Speed
- 2.4 Amps on Low Speed
- Maximum Velocity – 2700 FPM
- Balanced Exhaust Airflow Directional Airflow Horizontal, 45° Angle, 90° Angle
- Durable, rugged, chemical resistant housing, fan wheel, and control design.
- Operator interface conveniently located for easy access, featuring: power indicator lamp and large three-position switch.
- Phoenix exclusive Pilot Light and Sealed Switch are recessed to prevent damage.
- Ergonomic carry handle and power cord storage.
- Non-marking, anti-skid, rubber feet.
- On-board duplex GFCI outlet and circuit breaker (Phoenix CAM Pro only)
