Injectidry - HP 60 Rental
The HP60 System was designed to be used by water damage professionals who dry structures damaged by water. The HP60 System with Main AIR IN and OUT hoses combined with a Variety Panel Pak to create the floor drying package to dry hard surface (wood) floors as well as ceilings.
- Capacity: 134 linear feet (using 1 injector every 16”)
- Power Draw (115 Volts): 5.6 amps—11 amps (depending on load)
- Drying Modes: Negatively or Positively
Description
Injectidry High Pressure Drying Systems
Injectidry's High Pressure drying systems are specifically developed to target high risk areas of hidden moisture such as: walls and ceilings, even those coated with watertight finishes like PVA paint and vinyl wallpaper coverings, double-sheeted fire walls, party walls, sound barriers, insulation, walls behind cabinets and fixtures and floors. The Injectidry ®HP drying system is the only truly "industrial grade" system sold today. The internal blower is a Regenerative Blower and many operate 20,000 hours or more trouble free. This translates into more than 10 years of continuous operation. It is not a fan that is typically associated with a portable carpet cleaning machine or shop-vac.
The Injectidry HP60FDP Floor Drying Package is designed specifically for floor drying. This setup is extremely quick, easy, and efficient for your typical floor drying needs. With the many different Vac-It Panels that are available, you can quickly dry almost any wood floor.
The Injectidry HP60 drying system is the only truly industrial-grade system sold today. The internal blower is a Regenerative Blower and many operate 20,000 hours or more trouble free. This translates into more than 2 years of continuous operation. It is not a fan that is typically associated with a portable carpet cleaning machine or shop-vac.
Features
- Use with either positive or negative air flow
- Over 100 CFM
- 60 inches of water lift
- 8 decibels quieter than competing models, and when using the silencer it is even more quiet
- Total System Airflow: 108 CFM
- Static Pressure (Maximum): 60 inches (water lift)
- Weight (blower unit only): 50 lbs
- Air Injector Hole:
- 3/16 inch (wall)
- 1/4 inch (cabinet)
- Capacity: 134 linear feet (using 1 injector every 16”)
- Power Draw (115 Volts): 5.6 amps—11 amps (depending on load)
- Drying Modes: Negatively or Positively
